Installing The Ln2600 Router Overview; Mounting The Ln2600 Router On The Rack - Juniper LN2600 Hardware Manual

LN2600 Rugged Security Router Hardware Guide
Related
Documentation

Installing the LN2600 Router Overview

Related
Documentation

Mounting the LN2600 Router on the Rack

14
LN2600 Rugged Security Router Description on page 3
Installing the LN2600 Router Overview on page 14
The LN2600 router comes with an option of mounting the router on a rack or on a wall.
Based on your need, you can install the LN2600 router in one of the following ways:
"Mounting the LN2600 Router on the Rack" on page 14
router on a standard 19 in. rack with help of a rack-mounting kit. The rack-mounting
kit is sold separately. It does not come with the LN2600 router.
"Mounting the LN2600 Router on the Wall" on page 18
router on a suitable wall with the help of a wall-mounting kit. The wall-mounting kit
is sold separately. It does not come with the LN2600 router.
Mounting the LN2600 Router on the Rack on page 14
Mounting the LN2600 Router on the Wall on page 18
Before You Install the LN2600 Router on page 13
You can mount the LN2600 router on four posts of a standard 19 in. rack. The
rack-mounting kit comes with heat sink unit that provides enhanced cooling to the
LN2600 router.
A 19 in. rack is defined in Cabinets, Racks, Panels, and Associated Equipment (document
number EIA-310-D) published by the Electronics Industry Association (
Ensure that you have the following parts and tools available:
Phillips (+) screwdriver with a minimum shaft length of 6 inches (150 mm)
T10 Torx and 7-mm nut driver
An electrostatic discharge (ESD) grounding strap
Mounting brackets, mounting screws, heat sink unit, and matching screws provided
with the rack-mounting kit
Ground label and ground lug provided with the rack-mounting kit
To mount the LN2600 router on the 19 in. rack:
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect
1.
the strap to one of the ESD points on the chassis.
Keep the LN2600 router on a horizontal surface near the rack.
2.
Attach the heat sink unit provided with the rack-mounting kit to the rear side of the
3.
LN2600 router, and secure it with eight heat sink screws.
— You can mount the LN2600
— You can mount the LN2600
http://www.eia.org
Copyright © 2015, Juniper Networks, Inc.
).