Installing And Connecting An Acx4000 Router Overview - Juniper ACX4000 Hardware Manual

Installing and Connecting an ACX4000 Router
Overview
To install and connect an ACX4000 router:
1. Review all safety guidelines and warnings for the router. See
Warnings" on page
2. Prepare the installation site for the router. See
page 71.
3. Unpack the router and verify the parts received. See
4. Install the router in a rack. See
5. Ground the router. See
6. Connect the router to external devices. See:
• "Connecting the ACX4000 Router to Management Devices" on page 107
• "Connecting the ACX4000 Router to an External Alarm-Reporting Device" on page 111
• "Connecting the ACX4000 Router to External Clocking Devices" on page 110
7. Connect power to the router:
• AC-powered models—See
• DC-powered models—See
8. Perform initial configuration of the router by following instructions in
ACX4000 Router" on page 112
RELATED DOCUMENTATION
General Site Guidelines | 72
163.
"Installing the ACX4000 Router in the Rack" on page
"Connecting the ACX4000 Router to Earth Ground" on page
"Connecting AC Power Cords to the ACX4000 Router" on page
"Connecting DC Power Cables to the ACX4000 Router" on page
"General Safety Guidelines and
"Site Preparation Checklist for ACX4000 Routers" on
"Unpacking an ACX4000 Router" on page
"Initially Configuring the
95.
98.
101.
102.
104.
94