Acx500 Installation Overview; Installing And Connecting An Acx500 Indoor Router Overview; Installing And Connecting An Acx500 Outdoor Router Overview - Juniper ACX500 Hardware Manual

ACX500 Installation Overview

IN THIS SECTION

Installing and Connecting an ACX500 Indoor Router Overview | 123

Installing and Connecting an ACX500 Outdoor Router Overview | 123

Installing and Connecting an ACX500 Indoor Router Overview
To install and connect an ACX500 indoor router:
1. Unpack the router and verify the parts received. See
2. Install the router. See
3. Ground the router. See
4. Connect power to the router.
• AC-powered models—See
161.
• DC-powered models—See
163
5. Connect the router to external devices. See:
• "Connecting ACX500 Routers to Management Devices" on page 175
• "Connecting the ACX500 Router to an External Alarm-Reporting Device" on page 178
• "Connecting the ACX500 Router to External Clocking Devices" on page 179
• Requirements and Specifications for Installing a GNSS Antenna
6. Perform initial configuration of the router. See
page 179.
Installing and Connecting an ACX500 Outdoor Router Overview
Based on your need, you can install the ACX500 outdoor router in one of the following ways:
"Installing the ACX500 Indoor Router in a Rack" on page
"Connecting the ACX500 Router to Earth Ground" on page
"Connecting an AC Power Cord to the ACX500 Indoor Router" on page
"Connecting DC Power Cables to the ACX500 Indoor Router" on page
"Configuring Junos OS on the ACX500 Router" on
"Unpacking the ACX500" on page
129.
123
125.
156.