Install The Router Using A Pallet Jack With Attachment; Install The Pallet Jack Attachment - Juniper MX2010 Manual

Figure 12: Removing Lower Fan Trays
NOTE: For complete instructions on removing router components, see the
Routing Platform Hardware

Install the Router Using a Pallet Jack with Attachment

IN THIS SECTION

Install the Pallet Jack Attachment | 22

Use the Pallet Jack with Attachment to Install the Router | 23
Install the Pallet Jack Attachment
1. Remove the pallet jack attachment from the shipping crate.
2. Place the pallet jack attachment across both pallet jack legs.
3. Using a 9/16-in. (14 mm) socket wrench, loosen and remove the eight shipping bracket support
torque fasteners that are located on the top of the pallet jack attachment platform.
4. Using a 9/16-in. (14 mm) socket wrench, loosen the torque fasteners that are located on the four
adjustable pallet jack attachment brackets.
Guide.
MX2010 Universal
22