Installing A Mx2020 Router Using A Pallet Jack Overview; Installing The Pallet Jack Attachment - Juniper MX2020 Hardware Manual

Installing a MX2020 Router Using a Pallet Jack Overview

Installing the Pallet Jack Attachment

Copyright © 2015, Juniper Networks, Inc.
Because of the MX2020 router's size and weight—1,515 lb (687.19 kg) depending on the
configuration—we strongly recommend that you install the router using a pallet jack with
pallet jack attachment.
NOTE: Juniper Networks offers a router transport kit to install the router (see
"Installing the MX2020 Router Using a Router Transport Kit" on page
Verify that the mounting hardware has been installed.
1.
See: "Installing the MX2020 Mounting Hardware for a Four-Post Rack or Cabinet" on
page 205
Remove the router from the shipping crate:
2.
See: "Overview of Unpacking the MX2020 Router" on page 195
Gather the tools required to install the router.
3.
See: "Tools Required to Install the MX2020 Router Using a Pallet Jack" on page 191
Remove the components.
4.
See: "Removing Components from the MX2020 Router Chassis Before Installing It In
a Rack" on page 209
Install the MX2020 using the pallet jack attachment.
5.
See: "Installing the MX2020 Router Using a Pallet Jack with Attachment" on page 220
Reinstall the components.
6.
See: "Reinstalling Components in the MX2020 Chassis After Installing It In a Rack" on
page 236
To install the pallet jack attachment to the pallet jack:
Remove the pallet jack attachment from the shipping crate.
1.
Place the pallet jack attachment across both pallet jack legs.
2.
Using a 9/16-in. (14 mm) socket wrench, loosen and remove the eight shipping bracket
3.
support torque fasteners that are located on the top of the pallet jack attachment
platform.
Using a 9/16-in. (14 mm) socket wrench, loosen the torque fasteners that are located
4.
on the four adjustable pallet jack attachment brackets.
Chapter 18: Installing the Router
229).
219