Installing The Mx2020 Router Using A Pallet Jack; Overview Of Installing A Mx2020 Router Using A Pallet Jack - Juniper MX2020 Hardware Manual
3d universal edge router
Hide thumbs
Also See for MX2020:
- Hardware manual (630 pages) ,
- Hardware manual (800 pages) ,
- Quick start manual (72 pages)
Table of Contents
Advertisement
CHAPTER 7
Installing the MX2020 Router Using a
Pallet Jack
Overview of Installing a MX2020 Router Using a Pallet Jack
Copyright © 2013, Juniper Networks, Inc.
Reinstalling Components in the MX2020 Chassis After Installing It with a Pallet
Jack on page 99
Because of the MX2020 router's size and weight-1,500 lb (680.39 kg) depending on
the configuration-we strongly recommended that you install the router using a pallet
jack with pallet jack attachment.
Verify that the mounting hardware has been installed as described in
1.
MX2020 Mounting Hardware for a Four-Post Rack or Cabinet" on page
Remove the router from the shipping crate as described in
2.
the MX2020 Router" on page
Gather the tools required to install the router.
3.
See
"Tools Required to Install the MX2020 Router Using a Pallet Jack" on page 86
Remove the components.
4.
See
"Removing Components from the MX2020 Router Chassis Before Installing It
with a Pallet Jack" on page 86
Install the MX2020 using the pallet jack attachment.
5.
See
"Installing the MX2020 Router Using a Pallet Jack with Attachment" on page 96
Reinstall the components..
6.
See
"Reinstalling Components in the MX2020 Chassis After Installing It with a Pallet
Jack" on page 99
75.
"Installing the
81.
"Overview of Unpacking
85
Advertisement
Chapters
Table of Contents
Troubleshooting
