Renault Laguna III Manual page 3449

NON-SIDE OPENING ELEMENT MECHANISMS
Bonnet release cable: Removal - Refitting
V4Y or V9X
a Remove:
- the max fuse box cover,
- the bolt (3) ,
- the max fuse box partially.
a Remove the nut from the electric wiring support (4) .
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a Remove the bolt (5) .
134197
a Unclip the bonnet release control.
a Note the route of the bonnet release cable.
a Remove the bonnet release cable from inside the
vehicle.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
a Refit the bonnet release cable.
a Clip on the bonnet release control.
a Refit:
- the bolt (5) ,
- the bonnet catch (see 52A, Non-side opening el-
ement mechanisms, Bonnet lock: Removal -
Refitting, page 52A-1) .
a Carry out a function test.
II - FINAL OPERATION
V4Y or V9X
134186
a Refit:
- the nut of the electric wiring support (4) ,
- the max fuse box,
52A-5
52A
123996