Renault Laguna III Manual page 3467

D91
a Torque tighten the front side door sliding window
bolt (8 N.m).
a Refit the blanking covers (1) .
a Remove the suction cup.
Note:
It is possible to carry out a finishing adjustment
on the Z axis without having to remove the front
side door trim.
a Remove the blanking covers (3) .
WINDOWS
Side windows: Adjustment
135139
a Make an adjustment to the bolts (4) using a no. 5
BTR wrench, after having completely lowered the
front side door sliding window.
a Check that none of these actions causes the front
side door sliding window to become misaligned in
relation to the rear quarter panel window:
- Window too high towards the front: Turn the bolt (5)
anticlockwise(1 turn = 1 mm).
- Window too low towards the front: Turn the bolt (5)
clockwise(1 turn = 1 mm).
- Window too high towards the back: Turn the bolt
(6) anticlockwise(1 turn = 1 mm).
- Window too low towards the back: Turn the bolt (6)
clockwise(1 turn = 1 mm).
54A-6
54A
135140