Renault Laguna III Manual page 3460

NON-SIDE OPENING ELEMENT MECHANISMS
Sunroof deflector: Removal - Refitting
B91 or K91
REFITTING
I - REFITTING PREPARATION OPERATION
a
Note:
When « removing - refitting » the sunroof deflec-
tor, apply some HIGH RESISTANCE THREAD-
LOCK (see Vehicle: Parts and consumables
for the repair) (04B, Consumables - Products) to
the sunroof deflector bolts.
When replacing the sunroof deflector, replace the
bolts with those supplied with the sunroof deflec-
tor.
II - REFITTING OPERATION FOR PART
CONCERNED
a Refit the sunroof deflector (this operation requires
two people).
a Position the deflector return spring.
a Keep applying pressure to the deflector at (3) .
a Torque tighten then sunroof deflector bolts (2
N.m) (2) and (1) .
a Clean the area (4) using a LINT-FREE CLOTH
soaked in HEPTANE (see Vehicle: Parts and con-
sumables for the repair) (04B, Consumables -
Products).
a Wipe the area (4) with a clean, dry LINT-FREE
CLOTH (see Vehicle: Parts and consumables for
the repair) (04B, Consumables - Products).
a Using a fine brush, grease the area (4) with OPEN-
ING ELEMENT GREASE (see Vehicle: Parts and
consumables for the repair) (04B, Consumables -
Products).
III - FINAL OPERATION.
a Apply the after repair procedure using the Diagnos-
112564
tic tool :
- connect the Diagnostic tool,
- select « UCH » ,
- go to repair mode,
- display the « before/after repair procedure » for the
computer selected,
- select « sunroof motor » in the « List of the compo-
nents controlled by this computer » section,
- carry out the operations described in the « After re-
pair procedure » section.
52A-16
52A
120271