Renault Laguna III Manual page 3484

Rear screen: Removal - Refitting
B91 or K91
II - OPERATION FOR REMOVAL OF PART
CONCERNED
B91
a Pass the cutting wire under the rear screen's lower
and upper seals.
a Cut the cement bead (see Technical Note 560A).
a Remove the rear screen (this operation requires two
people).
REFITTING
I - REFITTING PREPARATION OPERATION
a For preparation and bonding (see Technical Note
560A).
a Always replace the shims.
a Refit the rear screen wiper motor (see Rear screen
wiper motor: Removal - Refitting) (85A, Wiping -
Washing).
B91
a Refit the side seals (2)
WINDOWS
II - REFITTING OPERATION FOR PART
CONCERNED
a Bond the rear screen (this operation requires two
people).
a Equal out the clearances and shut lines.
III - FINAL OPERATION
B91
a Connect the aerial amplifier connectors (1) .
a Connect the heated rear screen wiring harness con-
nectors.
a Refit:
- the high level brake light (see 3rd brake light: Re-
- the rear screen wiper arm (see Rear screen wiper
a Carry out a function test.
124815
a Refit the tailgate trim (see Tailgate trim: Removal -
Refitting) (73A, Non-side opening elements trim).
54A-23
moval - Refitting) (81A, Rear lighting),
arm: Removal - Refitting) (85A, Washing - Wip-
ing).
54A