Renault Laguna III Manual page 3434

SIDE OPENING ELEMENT MECHANISMS
Exterior door handle: Removal - Refitting
REFITTING
I - REFITTING PREPARATION OPERATION
a Check the presence and condition of seal (3) .
II - REFITTING OPERATION FOR PART
CONCERNED
a Connect the connectors (depending on equipment
level).
a Insert the front section and rear section of the exter-
nal door handle.
a Push the exterior door handle towards the front of
the vehicle.
a Refit the front side door lock barrel (see 51A, Side
opening element mechanisms, Front side door
lock barrel: Removal - Refitting, page 51A-5) or
the dummy lock.
a Carry out a function test.
III - FINAL OPERATION
a Refit the door sealing film (see Door sealing film:
Removal - Refitting) (65A, Opening element seal-
ing).
a Carry out a sealing test (see Technical Note
0653A).
a Refit the front side door trim (see Front side door
trim: Removal - Refitting) (72A, Side opening ele-
ments trim).
B91 or K91
a Refit the rear side door trim (see Rear side door
trim: Removal - Refitting) (72A, Side opening ele-
ments trim).
108048
51A-7
51A