Recording Function Specifications - YOKOGAWA MuR10000 Manual

12.3 Recording Function Specifications

Trend Recording (Pen Model)
Item
Recording pen
Step response time
Number of pens
Recording color
Trend recording
Pen offset compensation
Chart speed
Zone recording
Partial expanded recording Records by expanding the right or left side of the boundary position (the other section is reduced).
Trend Recording (Dot Model)
Item
Recording method
Recording color
Trend recording interval
Chart speed
Recording ON/OFF
Zone recording
Partial expanded recording Same as the pen model.
Chart Paper
Item
Printing width
Type/Length
Chart paper feeding accuracy
12-4
Specifications
Disposable felt pen
Approx. 1 s (using the IEC61143 measurement method)
Up to 4
Pen 1: Red, pen 2: Green, pen 3: Blue, pen 4: Violet
Updates the data at the scan interval. Continuous recording.
Records by compensating for the offset of each pen along the time axis.
5 to 12000 mm/h (82 steps).
Recording zone can be specified for each channel.
Recording width: 5 mm or more (1 mm steps)
Boundary position: 1 to 99%
Boundary value: Within the recording span range
Specifications
Trend recording by a 6-color wire dot printer
Channel 1: Purple, channel 2: Red, channel 3: Green, channel 4: Blue, channel 5: Brown,
channel 6: Black
Records at the following interval through a raster scan system.
Auto: Synchronizes to the chart speed and automatically sets to the interval so that the dots
do not overlap many times.
Fix: 10 s/6 channels (see section 12.5 for the recording interval on models with the
computation function (/M1 option)
1 to 1500 mm/h (1 mm steps)
Recording can be turned ON/OFF for each channel.
Same as the pen model.
Specifications
100 mm
Z-fold type. Approx. 16 m.
Within ±0.1% After feeding 1000 mm and with respect to the print scale on the chart paper.
IM 04P01B01-01E