Specifying The Timer Used In Statistical Calculations (Tlog) - YOKOGAWA MuR10000 Manual

9.6 Specifying the Timer Used in Statistical
Calculations (TLOG)
Procedure
IM 04P01B01-01E
On channels that perform statistical calculation (TLOG), the timer for determining the
interval is specified. The sum scale is also specified when using statistical calculation.
The timer is also used for the periodic printout of computed values.
1.
Hold down the key for 3 seconds to enter Setting mode.
MENU
2.
Press the key or SHIFT +
3.
Press the key or SHIFT +
key.
4. Set each item and press the
Use the key or SHIFT +
For the procedure on how to enter values or characters, see section 4.2.
If you press the ESC key in the middle of the operation, the settings entered up to
then are cancelled, and the display returns to a higher level menu.
5. When the Setting complete screen appears, do either of the following:
Press the key to set other channels.
If you are done, press the ESC key.
6. Hold down the key for 3 seconds to return to Operation mode.
MENU
Set=Math
Math=TLOG
CH=0A-0A
First channel Last channel
Timer No=Periodic
SUM scale=Off
0A-0A Channel
ESC/? Setting complete
key to select Math and then press the
key to select TLOG and then press the
key.
key to select values.
Set the channel range.
Select the timer number (Periodic, 1, or 2).
Select the sum scale.
The new setting takes effect.
1
2
3
key.
4
5
6
7
8
9
10
11
12
App
Index
9-13