Switching The Display Screen - YOKOGAWA MuR10000 Manual

3.6

Switching the Display Screen

Procedure
3-12
This section describes the procedure for switching the display screen.
To change the displayed content, see chapter 8.
Switching the Display Screen
The display screen switches each time the
Screen 01 through 15 are switched in order. Screens that are set to "Skip" are skipped.
Channel Auto Switching
On screens that show the measured values and computed values, the displayed channel
is automatically switched in ascending order. The switching interval can be set to 1 s, 2 s,
3 s, 4 s, or 5 s.
Measurement channels set to Skip and computation channels set to OFF are not
displayed.
Switching the Displayed Channel Using Keys
If Manual switching is specified, the channel switches each time the
in ascending order. All channels are displayed in order.
Note
The operation is different between auto channel switching and manual switching using keys on
the 2-channel digital display.
During auto switching
When switching using keys
key is pressed.
DISP
01 03
02 04
01 02
02 03
key is pressed
CH UP
05
06
03
04
IM 04P01B01-01E