YOKOGAWA MuR10000 Manual page 190

8.2 Changing the Displayed Information
Procedure
Explanation
8-4
Display in Which Different Screens Can Be Assigned to the Top and
Bottom Sections (Top: 2-Channel Digital Display, Bottom: Date/Time)
1.
Hold the key for 3 seconds to show the data display setup screen.
MENU
1
2. key or SHIFT +
Press the
press the key.
A sample screen of the display type appears. A section of the display blinks to
indicate that this is a data display setup screen.
3. or SHIFT +
Press the
which different screens can be assigned to the top and bottom sections (display in
which UP and DW are shown at the left edge) and press the
4.
Set the display type for the top section.
Press the key or SHIFT +
then press the
Set the channel switching interval and other settings.
5. Set the display type for the bottom section.
Press the key or SHIFT +
6.
When the Setting complete screen appears, press the
Hold the key down for 3 seconds to exit from the data display setup screen.
MENU
1
Screen No.=02
UP: 1 200.0 mV
DW: 05/01/01 00:0
Upper kind=
1 2000.0 2 2000.0
U_Interval=Manual
UL_CH=01 UR_CH=02
UL_CH=01 UR_CH=02
Lower kind=
05/01/01 00:00:00
Screen No.02
Setting complete
Display in Which Different Screens Can Be Assigned to the Top and
Bottom Sections
You can select the display type (see page 12-12) for the top and bottom sections.
Interval:
See "Interval" on the previous page.
key to select the screen number and then
key to switch the display. Select the display in
key to select 2-channel digital display, and
key.
key to select date/time, and press the
Select the screen No.
Current display type name.
Select the display type.
Display type of the top section
Select the display type.
Select the channel switching interval.
In this example, select Manual.
Select the channel to be displayed
at the left.
Select the channel to be displayed
at the right.
Display type of the bottom section
Select the display type of the
bottom section.
The new setting takes effect.
key.
key.
key.
IM 04P01B01-01E