Selecting To Show/Hide The Func Key Menus - YOKOGAWA MuR10000 Manual

7.20 Selecting to Show/Hide the FUNC Key Menus

Procedure
IM 04P01B01-01E
Select the menu for showing/hiding the FUNC key menus. This function is available on
version 1.31 or later.
Basic Setting mode cannot be entered when recording is in progress or when
computation is in progress on models with the computation function (/M1 option).
Changing the Settings
1.
Hold down the key for 3 seconds to enter Setting mode.
MENU
2.
Hold down the and
Setting mode.
3.
Press the key or SHIFT +
key.
4.
Press the key with Function shown on the screen.
5.
Set each item and press the
Use the key or SHIFT +
For the procedure on how to enter values or characters, see section 4.2.
If you press the ESC key in the middle of the operation, the settings entered up to
then are cancelled, and the display returns to a higher level menu.
6. When the Setting complete screen appears, do either of the following:
To correct the setting the
If you are done, press the ESC key.
keys simultaneously for 3 seconds to enter Basic
key to select Select menu and then press the
key.
key to select values.
key.
1
2
3
4
5
6
7
8
9
10
11
12
App
Index
7-31