YOKOGAWA MuR10000 Manual page 253

24 VDC/AC Power Supply Operation (/P1)
Item
Rated supply voltage
Allowable power supply voltage range
Withstand voltage
Rated power supply frequency
Allowable power supply frequency range
Effects of power supply voltage fluctuation
Effects of power supply frequency fluctuation
Rated power
Power consumption
Calibration Correction (/CC1)
Item
Number of calibration points 2 to 16 (can be specified for each channel)
Correction mode
Correctable range
Correction range
Others
Header Printout (/BT1)
Item
Printout function
Printed items
Recording start/recording end printouts
Message printouts
SD Memory Card (/EM1)
Item
Measured data save
Measured data replay
Setting parameters save
and load
IM 04P01B01-01E
Specifications
24 VDC/AC
21.6 to 26.4 VDC/AC
1000 VAC at 50/60 Hz for one minute (between the power terminal and the ground terminal)
50/60 Hz (for AC operation)
50 Hz ± 2% or 60 Hz ± 2% (for AC operation)
The fluctuation in the measured values is within ±1 digit and that in the recording is within ±0.1% in
the recording span for the 21.6 to 26.4 VAC/DC range.
The fluctuation in the measured values and recording is ±(0.1% of rdg + 1 digit) at the rated
frequency ±2 Hz.
25 VA (for DC) or 35 VA (for AC)
Model 24 VDC
1 to 4 pen models Approx. 7 VA*
6 dot model Approx. 8 VA*
* When balanced
Specifications
Revise or absolute value (can be specified for each channel)
DC input (DC voltage, TC, and RTD) and linear scaling (DC voltage, TC, RTD, and 1-5V)
(Not allowed on ON/OFF input (including linear scaling), delta computation, square root
computation, and computation channels)
st st
• (1 correction point + 1 correction value) < (2
• Corrected value (revise value: correction point + correction value, absolute value: correction
value) within the measurable range and scaling range (–5% to 105% or –20000 to 30000) of each
input range
• Setting limits
Left span (0%) < Right span (100%)
Left scale (0%) < Right scale (100%)
Calibration correction and bias functions cannot be used simultaneously (common to all channels)
Specifications
When recording starts or stops, prints out the batch name, comment, date/time, and chart speed.
Messages can also be printed out including measured values*.
Batch name: Batch number (up to 26 characters) and lot number (4 or 6 digit number, or Off)
Comment (up to 32 characters x 5 lines)
Chart speed
Date/time: Year, month, date, time, minute, second (date format depends on the date printout/
display format)
Printout On/Off selection: Batch name, chart speed, and date/time
In the 5 message formats, measured values*, strings (up to 16 characters), and date/time can be
arbitrarily combined and printed out (up to 35 characters total).
* Computed values can also be included on models with the /M1 option.
Specifications
Saves measured data to the SD memory card. File is divided every about 30 MB. .RXE extension.
Universal Viewer (software) for viewing and printing.
Data saved with a dot model to an SD memory card can be replayed on chart paper using a
recorder of the same model with equivalent or more functions.
Saves recorder setup data to an SD memory card. .PUL extension.
Loads setup data from an SD memory card into the recorder.
12.5 Specifications of Optional Functions
24 VAC Maximum
Approx. 13 VA* Approx. 35 VA
Approx. 13 VA* Approx. 35 VA
nd nd
correction point + 2 correction value) < ...
1
2
3
4
5
6
7
8
9
10
11
12
App
Index
12-17