YOKOGAWA MuR10000 Manual page 162

7.10 Setting the Key Lock Function
Explanation
7-18
Applying the Changes and Returning to Operation Mode
Press the key or SHIFT +
the key to select Store and then press the
the screen returns to Operation mode. If you select Abort and press the
changes are discarded, and the screen returns to Operation mode. Press the ESC key to
return to the Basic= screen.
Keylock
Sets whether to use or not use the key lock function.
If Not is selected, the setup ends here.
Password
Sets the password for releasing the key lock. Set the password using numbers and
spaces within 4 digits.
Operation of Keys to Be Key-Locked
Sets the operation of the keys to be key-locked. Select Lock or Free for each key
operation.
RCD: key
RCD
Feed: key
FEED
Menu: key
MENU
Disp Menu: key
MENU
1
Alarm ACK: Alarm ACK operation under the
Math: Computation start/stop/reset operation under the
Print out: Printout start/stop/reset operation under the
Message: Message printout operation under the
Buffer clear: Clear operation of the printout buffer memory under the
Periodic: Clear operation of the report data of periodic printout under the
key
Pen exchange: Operation of moving the pen to an easily accessible position of
replacement under the
R. exchange: Operation carried out when replacing the ribbon cassette with the power
turned ON under the
Data save: Start/stop operation for saving data to the SD memory card under the
key (/EM1 option)
FUNC
Data replay: Start/stop operation for replaying data from the SD memory card under
the
FUNC
SD eject: Operation for ejecting the SD memory card under the
option)
<Related Topics> Activating/Releasing the key lock: Section 3.13
key to select End and then press the
key (pen model)
FUNC
key (dot model)
FUNC
key (/EM1 option, dot model)
key. The changes are applied, and
key
FUNC
key (/M1 option)
FUNC
key
FUNC
key
FUNC
FUNC
key. Press
key, the
key
FUNC
FUNC
key (/EM1
IM 04P01B01-01E