Key Operations - YOKOGAWA MuR10000 Manual

4.2

Key Operations

Entering Setting Mode
Entering Basic Setting Mode
4-2
This section describes basic operations on the panel keys to change various settings.
Functions are set in Setting mode or Basic Setting mode.
Hold down the key for 3 seconds.
MENU
The Setting mode display appears. The top and bottom lines are the setup item and
comment, respectively.
The section that is blinking in the setup item that you change. In this manual, the section
that you change appears shaded.
Set=Range
Setup item
Input range and
Comment
The panel keys are set to the functions marked above the keys.
CHARACTER
RCD MENU DISP FUNC
Exiting from Setting Mode (Returning to Operation Mode)
Hold down the key for 3 seconds.
MENU
The screen returns to operation mode.
Basic Setting mode is entered from Setting mode.
Hold down the key for 3 seconds to enter Setting mode. Next, hold down both the
MENU
( ) key and the
DISP
The Basic Setting mode display appears. The top and bottom lines are the setup item
and comment, respectively.
The section that is blinking in the setup item that you change. In this manual, the section
that you change appears shaded.
Setup item Basic=Alarm
Auxiliary alarm
Comment
Exiting from Basic Setting Mode (Returning to Operation Mode)
This operation is used to return to Operation mode after changing the settings in Basic
Setting mode.
Press the ESC key several times to return to the Basic= screen.
key or SHIFT +
Press the
setup save screen appears.
Basic=End
Save Settings
key to select Store and then press the
Press the
and the screen returns to Operation mode. If you select Abort and press the
setting is discarded, and the screen returns to Operation mode.
End=Store
Save settings and
ESC/? SHIFT
MENU FEED CH UP
1
( ) key for 3 seconds.
FUNC
key to select End and then press the
The item to be controlled blinks.
The item to be controlled blinks.
key. The setting is applied,
key. The
key, the
IM 04P01B01-01E