Recording Mode - YOKOGAWA GX10 User Manual

SScaleOver
Detection of Values That Exceed the
Scale
Sets how to detect measurement over-range.
Syntax
SSclOver,p1
/P1 How to detect values that exceed the
scale
FREE Assume scale over-range when the
measurement range is exceeded.
OVER Assume scale over-range when
±105% of the scale is exceeded.
Query
SSclOver?
Example Assume scale over-range when the
measurement range is exceeded.
SSclOver,FREE
Description
• You cannot use this command to configure settings
while recording is in progress.
• You cannot use this command to configure settings
while computation is in progress.
• The setting specified with this command is valid if at
least one module is installed.
SMemory

Recording Mode

Sets the type of data to record.
Syntax
SMemory,p1
p1 Recording mode
Display data
D
D+E1 Display data and event data
E1 Event data
E1+E2 Event data 1+2
Query
SMemory?
Example Record display data.
SMemory,D
Description
• You cannot use this command to configure settings
while recording is in progress.
• You cannot use this command to configure settings
while computation is in progress.
• When the advanced security function (/AS) is enabled,
D+E1 and E1+E2 cannot be specified.
• When the multi batch function (/BT) is enabled, D+E1
and E1+E2 cannot be specified.
• When the measurement mode is set to high speed, p1
is fixed to E1.
• When the measurement mode is set to dual interval,
p1 is fixed to E1+E2.
IM 04L51B01-17EN
SMemKeyConfirm
Record Confirmation Action [GX/GP]
Sets the record confirmation action.
Syntax
SMemKeyConfirm,p1
p1 Enable or disable confirmation screen
(Off, On)
Query
SMemKeyConfirm?
Example Show the confirmation screen.
SMemKeyConfirm,On
Description
• When the multi batch function (/BT) is enabled, this is
fixed to On.
SDispData
Display Data Recording
Sets the display data recording mode.
Syntax
SDispData,p1,p2
p1 Recording interval (5s, 10s, 15s, 30s,
1min, 2min, 5min, 10min, 15min, 20min,
30min, 1h, 2h, 4h, 10h)/div.
p2 File save interval (10min, 20min, 30min,
1h, 2h, 3h, 4h, 6h, 8h, 12h,1day, 2day,
3day, 5day, 7day, 14day, 31day)
Query
SDispData?
Example Set the recording interval to 1 minute and file
save interval to 12 hours.
SDispData,1min,12h
Description
• You cannot use this command to configure settings
while recording is in progress.
• You cannot use this command to configure settings
while computation is in progress.
• You cannot choose a recording interval that is shorter
than the scan interval.
• You cannot choose a recording interval that is not an
integer multiple of the scan interval.
• File save interval is valid when display data recording
is enabled (recording mode of the
command).
• This command is invalid when the measurement
mode is set to high speed or dual interval.
2.4 Setting Commands
SMemory
2-17
1
2
App