Entering Characters - YOKOGAWA MuR10000 Manual

4.2 Key Operations

Entering Characters

4-4
Use the key or SHIFT +
Unit=ppm
CHR:a-z
Use the CHARACTER key or SHIFT + CHARACTER key to select the character type.
Use the key or SHIFT +
the character string.
Unit=ppm
CHR:a-z
The character types change in the following order: uppercase alphabet (A-Z), lowercase
alphabet (a-z), numbers (0-9), and symbols (%-.).
A-Z A to Z, and space
a-z a to z, and space
0-9 0 to 9, and space
%-. %, #, °, @, +, –, *, /, (, ), μ, Ω,
p
o
n
Unit=ppm
CHR:a-z
l
k
SHIFT key +
j
When you press the
Inserting Characters
Press the key or SHIFT +
character is to be inserted.
Press the CHARACTER key or SHIFT + CHARACTER key to show Ins DISP and then
press the key. A space for one character is inserted. Enter the character.
Unit=ppm
CHR:Ins DISP
Deleting a Character
key or SHIFT +
Use the
Press the CHARACTER key or SHIFT + CHARACTER key to show Del DISP and then
press the key. The character is deleted.
Deleting an Entire Character String
Press the CHARACTER key or SHIFT + CHARACTER key to show Clear DISP and
then press the key. The entire character string is deleted.
Copying & Pasting a Character String
Show the copy source character string.
Press the CHARACTER key or SHIFT + CHARACTER key to show Copy DISP and
then press the key. The character string is saved to the memory.
Show the copy destination.
Press the CHARACTER key or SHIFT + CHARACTER key to show Paste DISP and
then press the key. The character string is pasted.
key to move the cursor.
SHIFT key +
key
Cursor
key to select a character. You repeat these steps to set
Character type
2 , 3 , ., and space
key
key
key, the change is applied and the next screen is displayed.
key to move the cursor to the position where the
Position to insert the character
Display Ins DISP
key to move the cursor to the character to be deleted.
key
IM 04P01B01-01E