Setting The Bar Graph Display Mode - YOKOGAWA MuR10000 Manual

9.16 Setting the Bar Graph Display Mode

Procedure
Explanation
IM 04P01B01-01E
This section explains the details of setting the bar graph display mode.
Basic Setting mode cannot be entered when recording is in progress or when
computation is in progress on models with the computation function (/M1 option).
Changing the Settings
1.
Hold down the key for 3 seconds to enter Setting mode.
MENU
2.
Hold down the and
Setting mode.
3.
Press the key or SHIFT +
4. Press the key or SHIFT +
key.
5. Set each item and press the
Use the key or SHIFT +
For the procedure on how to enter values or characters, see section 4.2.
If you press the ESC key in the middle of the operation, the settings entered up to
then are cancelled, and the display returns to a higher level menu.
6.
When the Setting complete screen appears, do either of the following:
Press the key to set other channels.
If you are done, press the ESC key.
Basic=Math
Math=Bar graph
CH=0A-0A
First channel Last channel
Graph=Normal
0A-0A Channel
Setting complete
ESC/?
Applying the Changes and Returning to Operation Mode
Press the key or SHIFT +
key to select Store and then press the
the
the screen returns to Operation mode. If you select Abort and press the
changes are discarded, and the screen returns to Operation mode. Press the ESC key to
return to the Basic= screen.
Graph
Normal: Sets the base point of the bar graph to the left or right of the recording span
whichever is smaller in value.
Center: Sets the base point of the bar graph to the 50% position of the recording span.
keys simultaneously for 3 seconds to enter Basic
key to select Math and then press the
key to select Bar graph and then press the
key.
key to select values.
Set the channel range.
Select the display mode of the bar
graph.
The new setting takes effect.
key to select End and then press the
key. The changes are applied, and
1
2
3
4
key.
5
6
7
8
9
10
11
12
key. Press
key, the
App
Index
9-27