Changing The Channel Recording Color (Dot Model) - YOKOGAWA MuR10000 Manual

7.5 Changing the Channel Recording Color (Dot
Model)
Procedure
Explanation
7-8
This section explains the details of changing the trend recording color on the dot model.
Basic Setting mode cannot be entered when recording is in progress or when
computation is in progress on models with the computation function (/M1 option).
Changing the Settings
1.
Hold down the
MENU
2.
Hold down the
Setting mode.
3.
Press the key or SHIFT +
key.
4.
Set each item and press the
Use the key or SHIFT +
For the procedure on how to enter values or characters, see section 4.2.
If you press the ESC key in the middle of the operation, the settings entered up to
then are cancelled, and the display returns to a higher level menu.
5.
When the Setting complete screen appears, do either of the following:
Press the key to set other channels.
If you are done, press the ESC key.
Basic=Color
Channel=01
Color=Purple
01 Channel Color
ESC/? Setting complete
Applying the Changes and Returning to Operation Mode
Press the key or SHIFT +
the key to select Store and then press the
the screen returns to Operation mode. If you select Abort and press the
changes are discarded, and the screen returns to Operation mode. Press the ESC key to
return to the Basic= screen.
Color
Sets the recording color of measurement channels.
By default, the recording colors are set as follows:
Channel01: Purple
Channel 02: Red
Channel 03: Green
Channel 04: Blue
Channel 05: Brown
Channel 06: Black
key for 3 seconds to enter Setting mode.
and keys simultaneously for 3 seconds to enter Basic
key to select Color and then press the
key.
key to select values.
Select the channel.
Select the recording color.
The new setting takes effect.
key to select End and then press the
key. The changes are applied, and
key. Press
key, the
IM 04P01B01-01E