YOKOGAWA MuR10000 Manual page 34

1.4 Recording
Printout
1-16
The figure below is used to explain the printout contents. The actual printout and font
are different from those illustrated in the figure. The printout positions are also slightly
different.
Printout Example on the Pen Model
Manual printout
Nov.09.04 15:00
1 223.5mg/cm
3 H 591.6°C
Channel number or tag
Periodic printout
Nov.09.04!
13:50*
1 218.7mg/cm
2 390.6μS/cm
3 H 598.4°C
4 d -0.222V
0.0
1CH
RED
50mm/h_
Recording color
Time tick
A time tick is a mark that indicates the position of the date/time on the chart paper.
Time tick cancel mark
An exclamation point (!) is printed when the periodic printout time tick was not printed at the
correct position.
Channel number or tag printout
Channel numbers or tags can be printed.
<Related Topics>
Switching between channel number printout and tag printout: Section 7.7
Setting the periodic printout (interval, reference time, types of measured values, and
periodic printout ON/OFF): Section 7.8
Turning printout ON/OFF (alarm printout, recording start printout, new chart speed
printout, scale printout for periodic printout, and recording color printout for periodic
printout): Section 7.7
Setting the time format (alarm printout, message printout, recording start printout, and
new chart speed printout): Section 7.16
Turning periodic printout ON/OFF for each channel: Section 6.6
Executing manual print: Section 3.7
Setting the message string and printing messages: Sections 6.8 and 3.10
Clearing the alarm printout buffer: Section 3.9
Printing settings: Section 3.8
For the procedure to set the functions, see section 1.10, "Function Setup Guide."
3 2 437.2μS/cm
4 -0.222V
Time tick cancel mark
Offset compensation mark
3
Alarm
Delta computation
Time tick
09:52*START#205 ABCDEF
New chart speed printout
50mm/h*14:55
Scale
500.0
mg/cm 3
Buffer overflow mark
Alarm printout
1H3*10:09
1H3 10:05
Message printout
Recording start printout
08:00*25mm/h
IM 04P01B01-01E