Changing The Channel Assignments Of Recording Pens (Pen Model) - YOKOGAWA MuR10000 Manual

9.14 Changing the Channel Assignments of
Recording Pens (Pen Model)
Procedure
Explanation
9-24
Measurement channels and computation channels can be arbitrarily assigned to
recording pens.
Basic Setting mode cannot be entered when recording is in progress or when
computation is in progress on models with the computation function (/M1 option).
Changing the Settings
1.
Hold down the
MENU
2.
Hold down the
Setting mode.
3. key or SHIFT +
Press the
4.
Press the key or SHIFT +
key.
5.
Set each item and press the
Use the key or SHIFT +
For the procedure on how to enter values or characters, see section 4.2.
If you press the ESC key in the middle of the operation, the settings entered up to
then are cancelled, and the display returns to a higher level menu.
6. When the Setting complete screen appears, do either of the following:
To correct the setting, press the
If you are done, press the ESC key.
Basic=Math
Math=Output pen
Pen=1
Pen 1
Setting complete
ESC/?
Applying the Changes and Returning to Operation Mode
Press the key or SHIFT +
the key to select Store and then press the
the screen returns to Operation mode. If you select Abort and press the
changes are discarded, and the screen returns to Operation mode. Press the ESC key to
return to the Basic= screen.
Output pen
Measurement channels and computation channels can be arbitrarily assigned to
recording pens.
The default values are as follows:
Pen No. 1 (red): Channel 01
Pen No. 2 (green): Channel 02
Pen No. 3 (Blue): Channel 03
Pen No. 4 (violet): channel 04
key for 3 seconds to enter Setting mode.
and keys simultaneously for 3 seconds to enter Basic
key to select Math and then press the
key to select Output pen and then press the
key.
key to select values.
key.
Select the pen number and channel
CH=01
number.
The new setting takes effect.
key to select End and then press the
key. The changes are applied, and
key.
key. Press
key, the
IM 04P01B01-01E