Setting The Secondary Chart Speed (Remote Control Function, /R1) - YOKOGAWA MuR10000 Manual

6.9 Setting the Secondary Chart Speed (Remote
Control Function, /R1)
Procedure
Explanation
6-10
This section explains the details of setting the secondary chart speed when the chart
speed is to be switched using the remote control function (/R1 option).
1.
Hold down the
MENU
2.
Press the key or SHIFT +
3.
Press the key or SHIFT +
key.
4.
Set each item and press the
Use the key or SHIFT +
For the procedure on how to enter values or characters, see section 4.2.
If you press the ESC key in the middle of the operation, the settings entered up to
then are cancelled, and the display returns to a higher level menu.
5.
When the Setting complete screen appears, do either of the following:
To correct the setting, press the
If you are done, press the ESC key.
6.
Hold down the
MENU
Set=Aux
Aux=Chart2
mm/h= 20
Chart speed2
Setting complete
ESC/?
Chart Speed
See section 5.4.
<Related Topics> Setting the remote control function: Section 7.18
key for 3 seconds to enter Setting mode.
key to select Aux and then press the
key to select Chart2 and then press the
key.
key to select values.
key.
key for 3 seconds to return to Operation mode.
Set the chart speed.
The new setting takes effect.
key.
IM 04P01B01-01E