Enabling The Moving Average Function (Dot Model) - YOKOGAWA MuR10000 Manual

7.11 Enabling the Moving Average Function (Dot
Model)
Procedure
Explanation
IM 04P01B01-01E
This section explains the details of enabling/disabling the moving average function on the
dot model.
Basic Setting mode cannot be entered when recording is in progress or when
computation is in progress on models with the computation function (/M1 option).
Changing the Settings
1.
Hold down the key for 3 seconds to enter Setting mode.
MENU
2. Hold down the and
Setting mode.
3. Press the key or SHIFT +
key.
4. Set each item and press the
Use the key or SHIFT +
For the procedure on how to enter values or characters, see section 4.2.
If you press the ESC key in the middle of the operation, the settings entered up to
then are cancelled, and the display returns to a higher level menu.
5. When the Setting complete screen appears, do either of the following:
To correct the setting, press the
If you are done, press the ESC key.
Basic=Moving_AVE
Moving_AVE=Not
Move AVE
ESC/?
Setting complete
Applying the Changes and Returning to Operation Mode
Press the key or SHIFT +
the key to select Store and then press the
the screen returns to Operation mode. If you select Abort and press the
changes are discarded, and the screen returns to Operation mode. Press the ESC key to
return to the Basic= screen.
Moving_AVE
Use: Enables the setting of the number of samples of the moving average in Setting
mode.
Not: The Moving_AVE item does not appear in Setting mode.
<Related Topics> Setting the moving average function: Section 6.3
keys simultaneously for 3 seconds to enter Basic
key to select Moving_AVE and then press the
key.
key to select values.
key.
Enable/Disable moving average.
The new setting takes effect.
key to select End and then press the
key. The changes are applied, and
1
2
3
4
5
6
7
8
9
10
key. Press
11
key, the
12
App
Index
7-19