Setting The Constants Used In Equations - YOKOGAWA MuR10000 Manual

9.4

Setting the Constants Used in Equations

Procedure
Explanation
9-10
This section explains the details of setting constants to be used in computing equations.
1.
Hold down the
MENU
2.
Press the key or SHIFT +
3. Press the key or SHIFT +
key.
4.
Set each item and press the
Use the key or SHIFT +
For the procedure on how to enter values or characters, see section 4.2.
If you press the ESC key in the middle of the operation, the settings entered up to
then are cancelled, and the display returns to a higher level menu.
5.
When the Setting complete screen appears, do either of the following:
Press the key to set other channels.
If you are done, press the ESC key.
6.
Hold down the
MENU
Set=Math
Math=Constant
No.=K01
K01=1
K01
ESC/? Setting complete
Constant
Up to 30 constants can be registered. Enter the values as K01 to K30 in the equations.
Set the constants in the range shown below. The maximum number of significant digits is 5.
–9.9999E+29 to –1.0000E–30, 0, 1.0000E–30 to 9.9999E+29
key for 3 seconds to enter Setting mode.
key to select Math and then press the
key to select Constant and then press the
key.
key to select values.
key for 3 seconds to return to Operation mode.
Select the constant number.
Set the value.
The new setting takes effect.
key.
IM 04P01B01-01E