Changing The Type Of Report Data Printed In Periodic Printout - YOKOGAWA MuR10000 Manual

9.15 Changing the Type of Report Data Printed in
Periodic Printout
Procedure
IM 04P01B01-01E
This section explains the details of selecting the type of report (the average, minimum,
maximum, or sum) printed in periodic printout.
To print the report data during periodic printout, set the type of data to be printed to report
(see section 7.8).
Basic Setting mode cannot be entered when recording is in progress or when
computation is in progress on models with the computation function (/M1 option).
Changing the Settings
1.
Hold down the key for 3 seconds to enter Setting mode.
MENU
2.
Hold down the and
Setting mode.
3. key or SHIFT +
Press the
4.
Press the key or SHIFT +
key.
5.
Set each item and press the
Use the key or SHIFT +
For the procedure on how to enter values or characters, see section 4.2.
If you press the ESC key in the middle of the operation, the settings entered up to
then are cancelled, and the display returns to a higher level menu.
6.
When the Setting complete screen appears, do either of the following:
To correct the setting, press the
If you are done, press the ESC key.
Basic=Math
Math=Print2
CH=0A-0A
First channel Last channel
Mode=AVE
SUM scale=Off
Periodic
ESC/? Setting complete
Applying the Changes and Returning to Operation Mode
key or SHIFT +
Press the
the key to select Store and then press the
the screen returns to Operation mode. If you select Abort and press the
changes are discarded, and the screen returns to Operation mode. Press the ESC key to
return to the Basic= screen.
keys simultaneously for 3 seconds to enter Basic
key to select Math and then press the
key to select Print2 and then press the
key.
key to select values.
key.
Set the channel range.
Select the type of report data to print.
Select the sum scale.
The new setting takes effect.
key to select End and then press the
key. The changes are applied, and
1
2
3
4
5
key.
6
7
8
9
10
11
12
App
key. Press
Index
key, the
9-25