Setting The Filter (Pen Model) - YOKOGAWA MuR10000 Manual

6.2

Setting the Filter (Pen Model)

Procedure
Explanation
IM 04P01B01-01E
This section explains the details of setting a filter on the measurement channels on the
pen model.
1.
Hold down the key for 3 seconds to enter Setting mode.
MENU
2.
Press the key or SHIFT +
3.
Press the key or SHIFT +
4. Set each item and press the
Use the key or SHIFT +
For the procedure on how to enter values or characters, see section 4.2.
If you press the ESC key in the middle of the operation, the settings entered up to
then are cancelled, and the display returns to a higher level menu.
5. When the Setting complete screen appears, do either of the following:
Press the key to set other channels.
If you are done, press the ESC key.
6.
Hold down the key for 3 seconds to return to Operation mode.
MENU
Set=Aux
Aux=Filter
CH=01-01
First channel Last channel
Resp.Time=Off
01-01 Channel
ESC/?
Setting complete
Filter Time Constant
The time constant is selectable from 2 s, 5 s, and 10 s. Select Off when not using the
filter.
<Related Topics> Enabling the filter function: Section 7.12
key to select Aux and then press the
key to select Filter and then press the
key.
key to select values.
Set the channel range.
Set the filter time constant.
The new setting takes effect.
1
2
3
key.
key.
4
5
6
7
8
9
10
11
12
App
Index
6-3