YOKOGAWA MuR10000 Manual page 33

IM 04P01B01-01E
Partial Expanded Recording
This function expands a section of the recording range. By default, partial expanded
recording is disabled.
Compressed Expanded
<Related Topics> Setting the partial expanded recording: Sections 7.13 and 6.5
Pen Offset Compensation (Pen Model)
This function compensates for the pen offset (phase difference) along the time axis.
On 2-pen, 3-pen, and 4-pen recorders, there are offsets along the time axis (phase
difference) between the pens. This offset is corrected when pen offset compensation is
used.
Below is an explanation for the 2-pen model.
The recording of these two pens are offset by an amount of phase P. If pen offset
compensation is enabled, the measured values of pen 1 are stored in the memory, and
recorded when the chart paper is fed by an amount corresponding to P.
Reference pen (pen 2)
Chart paper
By default, this function is disabled.
<Related Topics> Setting the pen offset compensation: Section 7.6
Ejection of pen offset compensating data: "Header Printout (/BT1
Option) in section 1.4
For the procedure to set the functions, see section 1.10, "Function Setup Guide."
Same time
Pen 1
Recorder front panel
P
Chart feeding direction
1.4 Recording
1
2
3
4
5
6
7
8
9
10
11
12
App
Index
1-15