YOKOGAWA MuR10000 Manual page 40

1.4 Recording
Header Printout (/BT1 Option)
Printout/Operation
Comment
Batch name
Batch number
Lot number
Date/time
Chart speed
Chart paper feed
Ejection of pen offset
compensating data
1-22
When recording is started, the Start printout is performed, and recording starts. During
trend recording, you can print out messages (up to 5) that include measured values.*
When recording is stopped, End printout is performed.
Operation 1. Chart paper feed
2. Start printout
3. Recording start
(Operation (Record start)
instruction)
• Example Printout (Dot Model)
* Computed values can also be included on models with the /M1 option.
The printout examples may appear differently from the actual printout as a result of functional
improvements.
Start Printout and End printout
When recording starts, "Start printout" or "Start printout 2" prints. Also, when recording
stops, "End printout" or "End printout 2" prints.
Description
Prints 32 characters x 5 lines or less.
Prints up to 26 characters.
Prints a number from 4-digits or 6-digits.
The date format prints out according to the date
printout/display format.
Prints the current chart paper feed speed.
Feeds the chart paper 50 mm or less before Start printout.
Feeds the chart paper 50 mm or less after End printout.
You can record the portion of the data that remains after
recording stops. Also, when recording the remaining portion of
the data, you can change the chart speed to 450 mm/h (fixed).
You can select whether to print out the batch name, date/time, and chart speed. By default, the
printout is enabled.
For the procedure to set the functions, see section 1.10, "Function Setup Guide."
Message printout 1 Message printout 2
including measured including measured
values* values*
(Message printout 1) (Message printout 2)
End printout
Comment
Batch name (batch number and lot number)
date/time, and chart speed
Start printout
Comment
Batch name (batch number and lot number)
date/time, and chart speed
1. Recording stop
2. End printout
3. Chart paper feed
(Recording stop)
Message printout 2 including
measured values*
Message printout 1 including
measured values*
Notes
Can be displayed in the main display.
You can automatically increment by 1
when recording stops.
Date and time cannot be turned
On/Off independently.
Steps of 1 mm
Steps of 1 mm
When pen offset compensating is On
(pen model).
IM 04P01B01-01E