Setting The Unit On Scaled Channels - YOKOGAWA MuR10000 Manual

5.3

Setting the Unit on Scaled Channels

Procedure
Explanation
5-12
Units are set on channels whose input range is set to Scaling, 1-5V, or SQRT.
1.
Hold down the
MENU
2.
Press the key or SHIFT +
3. Set each item and press the
Use the key or SHIFT +
For the procedure on how to enter values or characters, see section 4.2.
If you press the ESC key in the middle of the operation, the settings entered up to
then are cancelled, and the display returns to a higher level menu.
4.
When the Setting complete screen appears, do either of the following:
Press the key to set other channels.
If you are done, press the ESC key.
5.
Hold down the
MENU
Set=Unit
CH=01-01
First channel Last channel
Unit=
01-01 Channel
ESC/?
Setting complete
Characters That Can Be Used for Units
A unit is set using up to six characters.
The available characters are as follows:
Alphabet, numbers, symbols (%, #, °, @, +, –, *, /, (, ), µ, Ω,
<Related Topics> Entering the unit string: Page 25 in the μR10000 Recorder Operation
Guide
key for 3 seconds to enter Setting mode.
key to select Unit and then press the
key.
key to select values.
key for 3 seconds to return to Operation mode.
Set the channel range.
Set the unit.
The new setting takes effect.
key.
2 3
, , .), and space
IM 04P01B01-01E