Setting The Message String - YOKOGAWA MuR10000 Manual

6.8

Setting the Message String

Procedure
Explanation
IM 04P01B01-01E
This section explains the details of setting the message strings to be printed on the chart
paper. Up to five message strings can be registered.
1.
Hold down the key for 3 seconds to enter Setting mode.
MENU
2.
Press the key or SHIFT +
3.
Press the key or SHIFT +
key.
4.
Set each item and press the
Use the key or SHIFT +
For the procedure on how to enter values or characters, see section 4.2.
If you press the ESC key in the middle of the operation, the settings entered up to
then are cancelled, and the display returns to a higher level menu.
5. When the Setting complete screen appears, do either of the following:
To correct the setting, press the
If you are done, press the ESC key.
6. Hold down the key for 3 seconds to return to Operation mode.
MENU
Set=Aux
Aux=Message
Message No.=1
CHR:A-Z
Message 1
ESC/? Setting complete
Characters That Can Be Used for Messages
Set the message using up to 16 characters.
The available characters are as follows:
Alphabet, numbers, symbols (%, #, °, @, +, –, *, /, (, ), µ, Ω,
<Related Topics> Printing messages: Section 3.10
key to select Aux and then press the
key to select Message and then press the
key.
key to select values.
key.
Select the message No.
Set message string.
The new setting takes effect.
2 3
, , .), and space
1
2
3
key.
4
5
6
7
8
9
10
11
12
App
Index
6-9