Turning Printouts On/Off; (Selecting The Channel/Tag Printout And Turning On/Off The Channel No., Alarm, Recording Start, New Chart Speed, Scale, And Pen Color Printouts) - YOKOGAWA MuR10000 Manual

7.7

Turning Printouts ON/OFF

(Selecting the Channel/Tag Printout and Turning ON/OFF the Channel No.,
Alarm, Recording Start, New Chart Speed, Scale, and Pen Color Printouts)
Procedure
7-10
This section explains the details of turning ON/OFF the printouts of various items.
Basic Setting mode cannot be entered when recording is in progress or when
computation is in progress on models with the computation function (/M1 option).
Changing the Settings
1.
Hold down the
MENU
2.
Hold down the
Setting mode.
3.
Press the key or SHIFT +
4.
Set each item and press the
Use the key or SHIFT +
For the procedure on how to enter values or characters, see section 4.2.
If you press the ESC key in the middle of the operation, the settings entered up to
then are cancelled, and the display returns to a higher level menu.
5.
When the Setting complete screen appears, do either of the following:
To correct the setting, press the
If you are done, press the ESC key.
Basic=Print
CH/Tag=Channel
(Dot model)
Channel=On
Alarm=On1
Record On=Off
Chart speed=On
Scale=On
(Pen model)
Pen color=On
Printout
Setting complete
ESC/?
key for 3 seconds to enter Setting mode.
and keys simultaneously for 3 seconds to enter Basic
key to select Print and then press the
key.
key to select values.
key.
Select whether to use the channel
number or tags for the printout.
Select whether to print the channel
number or tag beside the trend
recording.
Select whether to print the alarm
occurrence/release.
Select On to enable recording start
printout.
Select On to print when the chart
speed is changed.
Select On to print the channel scale in
periodic printout.
Select On to print the pen color in
periodic printout.
The new setting takes effect.
key.
IM 04P01B01-01E