Enabling Start Printout, End Printout, And Message Format (/Bt1 Option) - YOKOGAWA MuR10000 Manual

7.24 Enabling Start Printout, End printout, and
Message Format (/BT1 Option)
Procedure
7-40
This section explains the details of enabling/disabling the Start printout, End printout, and
Message format.
Basic Setting mode cannot be entered when recording is in progress or when
computation is in progress on models with the computation function (/M1 option).
Changing the Settings
1.
Hold down the
MENU
2.
Hold down the
Setting mode.
3.
Press the key or SHIFT +
key.
4.
Set each item and press the
key or SHIFT +
Use the
For the procedure on how to enter values or characters, see section 4.2.
If you press the ESC key in the middle of the operation, the settings entered up to
then are cancelled, and the display returns to a higher level menu.
5. When the Setting complete screen appears, do either of the following:
To correct the setting the
If you are done, press the ESC key.
Basic=Batch
Batch=Use
(Only when batch is set to Use)
Lot No.=4
(Only when batch is set to Use)
Dual comment=Use
MSG format=Use
Basic batch
ESC/?
Setting complete
Applying the Changes and Returning to Operation Mode
Press the key or SHIFT +
the key to select Store and then press the
the screen returns to Operation mode. If you select Abort and press the
changes are discarded, and the screen returns to Operation mode. Press the ESC key to
return to the Basic= screen.
key for 3 seconds to enter Setting mode.
and keys simultaneously for 3 seconds to enter Basic
key to select Batch and then press the
key.
key to select values.
key.
Enable/disable the Start printout and
End printout function.
Select 4 or 6 digits for the number of
digits in the lot number, or disable.
Select to enable or disable Start
printout 2 and End printout 2.
Enable/disable the message format
function.
The new setting takes effect.
key to select End and then press the
key. The changes are applied, and
key. Press
key, the
IM 04P01B01-01E