YOKOGAWA MuR10000 Manual page 157

Types of Report Data to Be Printed
IM 04P01B01-01E
7.8 Setting the Periodic Printout Interval and the Type of Data to Be Printed
Changing the Settings
1. Hold down the key for 3 seconds to enter Setting mode.
MENU
2.
Hold down the and
Setting mode.
3. key or SHIFT +
Press the
key.
4.
Set each item and press the
key or SHIFT +
Use the
For the procedure on how to enter values or characters, see section 4.2.
If you press the ESC key in the middle of the operation, the settings entered up to
then are cancelled, and the display returns to a higher level menu.
5.
When the Setting complete screen appears, do either of the following:
Press the key to set other channels.
If you are done, press the ESC key.
Basic=Print2
CH=01-01
First channel Last channel
Mode=AVE
SUM scale=Off
Printout2
ESC/?
Setting complete
Applying the Changes and Returning to Operation Mode
Press the key or SHIFT +
the key to select Store and then press the
the screen returns to Operation mode. If you select Abort and press the
changes are discarded, and the screen returns to Operation mode. Press the ESC key to
return to the Basic= screen.
keys simultaneously for 3 seconds to enter Basic
key to select Print2 and then press the
key.
key to select values.
Set the channel range.
Select the type of report data to print.
Select the sum scale.
The new setting takes effect.
key to select End and then press the
key. The changes are applied, and
1
2
3
4
5
6
7
8
9
10
key. Press
key, the
11
12
App
Index
7-13