Changing The Settings - YOKOGAWA MuR10000 Manual

Changing the Settings

Using the ESC Key
Entering Values
IM 04P01B01-01E
Note
The comment line shows useful information such as a description of the setup item and the
range of selectable values. Read the comment and change the items as necessary.
The selected item change each time you press the
in reverse order if you press the
SHIFT key + key
Skip
Volt
Mode=TC
RTD
1-5V
key
This manual denotes the operation of pressing a key while holding down the SHIFT key
as SHIFT + the other key (for example: SHIFT +
After you make a selection, press the
When the Setting complete screen appears, the changed item is applied.
01-01 Channel
Setting complete
If you press the ESC ( ) key, the operation is cancelled, and the display returns to a
MENU
higher level menu. In other words, if you do not show the Setting Complete screen, the
changes you made up to that point are discarded.
Press the ESC ( ) key while holding down the SHIFT (
MENU
comment that is displayed at the bottom half of the screen.
Use the key or SHIFT +
key to change a digit value. You repeat these steps to enter the value.
Span_L= -2.000
-2.000/ 2.000V
8
7
6
Span_L= -1.500
-2.000/
4
3
SHIFT key +
2
When you press the key, the change is applied and the next screen is displayed.
key. The selected item changes
key while holding down the SHIFT key.
key).
key. The next screen appears.
FEED
key to move the cursor. Use the
SHIFT key + key
key
Cursor
key
key
4.2 Key Operations
) key to show or hide the
key or SHIFT +
4-3
1
2
3
4
5
6
7
8
9
10
11
12
App
Index