YOKOGAWA MuR10000 Manual page 178

7.21 Selecting to Show/Hide Setting Mode Menus
Explanation
7-34
From the previous page
(/CC1 option)
Calibration=On
(/M1 option)
Math=On
(/BT1 option)
Batch name=On
(/BT1 option)
Batch detail=On
Select set menu
ESC/? Setting complete
Applying the Changes and Returning to Operation Mode
Press the key or SHIFT +
the key to select Store and then press the
the screen returns to Operation mode. If you select Abort and press the
changes are discarded, and the screen returns to Operation mode. Press the ESC key to
return to the Basic= screen.
On: Display the menu in Setting mode.
Off: Do not display the menu in Setting mode when Customized Menu is enabled.
<Related Topics> Enabling the Customized Menu: Section 7.22
Select whether to display Calibration in
Setting mode. Select On or Off.
Select whether to display Math in Setting
mode. Select On or Off.
Select whether to display Batch No. and
Lot No. in Setting mode. Select On or Off.
Select whether to display Batch detail in
Setting mode. Select On or Off.
The new setting takes effect.
key to select End and then press the
key. The changes are applied, and
key. Press
key, the
IM 04P01B01-01E