Changing The Chart Speed - YOKOGAWA MuR10000 Manual

5.4

Changing the Chart Speed

Procedure
Explanation
IM 04P01B01-01E
This section explains the details of changing the chart speed.
1.
Hold down the key for 3 seconds to enter Setting mode.
MENU
2.
Press the key or SHIFT +
key.
3.
Set the chart speed and press the
Use the key or SHIFT +
For the procedure on how to enter values or characters, see section 4.2.
If you press the ESC key in the middle of the operation, the settings entered up to
then are cancelled, and the display returns to a higher level menu.
4. When the Setting complete screen appears, do either of the following:
To correct the setting, press the
If you are done, press the ESC key.
5. Hold down the key for 3 seconds to return to Operation mode.
MENU
Set=Chart
mm/h= 20
Chart speed
ESC/?
Setting complete
Chart Speed
• Pen Model
The chart speed can be selected from 82 settings shown below.
Chart speed on the pen model (unit: mm/h)
5 6 8
24 25 30
60 64 72
135 150 160
320 360 375
720 750 800
1500 1600 1800
3600 4000 4320
10800 12000
• Dot Model
The chart speed can be set in the range of 1 to 1500 mm/h in 1 mm steps.
key to select Chart and then press the
key.
key to select values.
key.
Set the chart speed.
The new setting takes effect.
9 10 12 15
32 36 40 45
75 80 90 96
180 200 225 240
400 450 480 500
900 960 1000 1080
2000 2160 2250 2400
4500 4800 5400 6000
16 18 20
48 50 54
100 120 125
250 270 300
540 600 675
1200 1350 1440
2700 2880 3000
7200 8000 9000
5-13
1
2
3
4
5
6
7
8
9
10
11
12
App
Index