Setting Tags On Channels - YOKOGAWA MuR10000 Manual

6.7

Setting Tags on Channels

Procedure
Explanation
6-8
This section explains the details of setting tags to measurement channels.
1.
Hold down the
MENU
2.
Press the key or SHIFT +
3. Press the key or SHIFT +
4. Set each item and press the
Use the key or SHIFT +
For the procedure on how to enter values or characters, see section 4.2.
If you press the ESC key in the middle of the operation, the settings entered up to
then are cancelled, and the display returns to a higher level menu.
5.
When the Setting complete screen appears, do either of the following:
Press the key to set other channels.
If you are done, press the ESC key.
6.
Hold down the
MENU
Set=Aux
Aux=Tag
CH=01-01
First channel Last channel
Tag=
01-01 Channel
ESC/? Setting complete
Characters That Can Be Used for Tags
Set the tag using up to 7 characters.
The available characters are as follows:
Alphabet, numbers, symbols (%, #, °, @, +, –, *, /, (, ), µ, Ω,
<Related Topics> Printing tags in place of channel numbers: Section 7.7
Displaying tags in place of channel numbers: Section 8.2
key for 3 seconds to enter Setting mode.
key to select Aux and then press the
key to select Tag and then press the
key.
key to select values.
key for 3 seconds to return to Operation mode.
Set the channel range.
Set the tag.
The new setting takes effect.
key.
key.
2 3
, , .), and space
IM 04P01B01-01E