YOKOGAWA MuR10000 Manual page 235

IM 04P01B01-01E
7. Press the ESC key to finish the adjustment. The screen returns to the
Basic=P_Adj screen.
Basic=P_Adj
P_Adj=Hysteresis
Hysteresis=-2
P_Adj
ESC/?
Setting complete
Applying the Changes and Returning to Operation Mode
Press the key or SHIFT +
the key to select Store and then press the
the screen returns to Operation mode. If you select Abort and press the
changes are discarded, and the screen returns to Operation mode. Press the ESC key to
return to the Basic= screen.
Note
When the Customized Menu is enabled, the operation is different.
• When "P_Adj" in the Customized Menu is On
1. Perform steps 1-4 of "Adjusting the Dot Printing Position."
2. When the instrument enters Basic Setting mode, "Menu kind" appears. Select "Free"
then press a key.
3. Perform the steps starting with step 5 of "Adjusting the Dot Printing Position."
• When "P_Adj" in the Customized Menu is Off
See "Disabling the Customized Menu" or "Changing the Settings without Disabling the Basic
Setting Mode Lock."
<Related Topics> Enabling/Disabling the customized menu: Section 7.22
Changing the settings without r eleasing the basic setting mode lock:
Section 7.22
11.6 Adjusting the Dot Printing Position (Dot Model)
Select Hysteresis, Zero, or Full.
Change the value to adjust the dot
printing position.
The dot printing position moves.
key to select End and then press the
key. The changes are applied, and
1
2
3
4
5
key. Press
key, the
6
7
8
9
10
11
12
App
Index
11-9