Turning Trend Recording (Dot Model) And Periodic Printout On/Off For Each Channel - YOKOGAWA MuR10000 Manual

6.6 Turning Trend Recording (Dot Model) and
Periodic Printout ON/OFF for Each Channel
Procedure
Explanation
IM 04P01B01-01E
This section explains the details of setting the trend recording and periodic printout for
each measurement channel.
The following settings can be entered for each channel.
• Turn trend recording ON/OFF (dot model only).
• Turn the printing of measured values ON/OFF during periodic printout.
1. Hold down the key for 3 seconds to enter Setting mode.
MENU
2. Press the key or SHIFT +
3.
Press the key or SHIFT +
key.
4.
Set each item and press the
key or SHIFT +
Use the
For the procedure on how to enter values or characters, see section 4.2.
If you press the ESC key in the middle of the operation, the settings entered up to
then are cancelled, and the display returns to a higher level menu.
5.
When the Setting complete screen appears, do either of the following:
Press the key to set other channels.
If you are done, press the ESC key.
6.
Hold down the key for 3 seconds to return to Operation mode.
MENU
Set=Aux
Aux=Print out
CH=01-01
First channel Last channel
(Dot model)
Trend=On
Periodic=On
01-01 Channel
ESC/? Setting complete
Trend Recording (Dot Model)
On: Turns On the trend recording of the specified channel.
Periodic Printout
On: Prints the measured values (instantaneous values or report data) of the specified
channel during periodic printout.
Off: Does not print the channels and measured values during periodic printout.
key to select Aux and then press the
key to select Print out and then press the
key.
key to select values.
Set the channel range.
Turn trend recording On/Off.
Select whether to print the measured
values during periodic printout (On/Off).
The new setting takes effect.
1
2
3
4
key.
5
6
7
8
9
10
11
12
App
Index
6-7