Setting Up Start Printout And End Printout (/Bt1 Option) - YOKOGAWA MuR10000 Manual

6.14 Setting Up Start Printout and End printout
(/BT1 Option)
Procedure
6-16
Enter settings for Start printout/Start printout 2 when starting recording, and for End
printout/End printout 2 when stopping recording.
You cannot enter Basic Setting mode during the time between start printout to end
printout.
1.
Hold down the
MENU
2. key or SHIFT +
Press the
key.
3. Set each item and press the
Use the key or SHIFT +
For the procedure on how to enter values or characters, see section 4.2.
If you press the ESC key in the middle of the operation, the settings entered up to
then are cancelled, and the display returns to a higher level menu.
4.
When the Setting complete screen appears, do either of the following:
To correct the setting the
If you are done, press the ESC key.
5.
Hold down the
MENU
Setting the Batch Number
Set=Batch
Batch=Batch
No.=
Batch No.
ESC/?
Setting
Setting the Lot Number
Set=Batch
(When the Lot No. in Basic Setting
mode is 4 or 6)
Batch=Lot No.
Lot No.=
Batch lot No.
ESC/? Setting complete
key for 3 seconds to enter Setting mode.
key to select Batch and then press the
key.
key to select values.
key.
key for 3 seconds to return to Operation mode.
Select Batch No.
No.
Set the batch number.
The new setting takes effect.
complete
Select Lot No.
Set the lot number.
0
The new setting takes effect.
IM 04P01B01-01E