YOKOGAWA MuR10000 Manual page 247

Name
DI/DO display
Multiple display
Tag_1CH digital display
Tag_2CH digital display
Tag_1CH digital + 1CH
bargraph display
Tag_1CH digital + 4CH
bargraph display (Pen model)
Status display
System display
SD memory card status
display
Batch name display
Lights out
IM 04P01B01-01E
Display Example
1H-1999.9ABCDEF
05/09/21 11:26:37
Display in which different screens are
assigned to the top and bottom sections.
Measurement channel
abcdefg
H-1999.9ABCDEF
Alarm Measured
Tag
value
Computation channel
abcdefg
H9999999.9ABCDEF
abcdefgH-1999.9ABC
abcdefgH9999999.9
The top section is measurement channel;
bottom section is computation channel
abcdefgH-1999.9ABC
Computation channel
abcdefgH9999999.9
abcdefgH-1999.9ABC
Computation channel
abcdefgH9999999.9
Chart end SD memory card
Alarm
100mm Dot model
Analog: 6
The displayed contents switch every 3 seconds.
Status Available
Usage 63%
The displayed contents switch every 3 seconds.
Batch No.-0002
Lot number
Automatically added when batch number and lot number are enabled.
Batch number
12.4 Display Function Specifications
DI (remote control input, /R1 option) status.
DO (alarm output relay, /Ax option) status.
See the next page.
Tag (7 digits), alarm (1 digit),
measured value (7 digits), unit (6 digits)
Unit
Tag (7 digits), alarm (1 digit),
computed value (9 digits), unit (6 digits)
Measurement channel
Tag (7 digits), alarm (1 digit),
measured value (6 digits), unit (3 digits)
Computation channel
Tag (7 digits), alarm (1 digit),
computed value (9 digits)
The digital display is the same as
the Tag_2CH digital display.
Bar graph, scale, alarm (bar graph)
Value and bar graph of the same channel.
The digital display is the same as
the Tag_2CH digital display.
Bar graph
Displays the appropriate mark.
• Product information
Number of signal inputs, options installed,
number of computation channels, MAC
address, and recorder version (firmware
version)
• Setup data
Periodic printout interval, dot printing
interval (dot model), and pen offset
compensation On/Off (pen model)
For models with the SD memory card (/EM1
option)
Card status, usage, free space, card capacity,
volume label, and the remaining length of time
for saving data.
For models with the Header printout
(/BT1 option)
No display.
Description
12-11
1
2
3
4
5
6
7
8
9
10
11
12
App
Index