YOKOGAWA MuR10000 Manual page 54

1.10 Function Setup Guide
Item
Periodic printout
Tag printout
Tag display
Alarm occurrence/release printout
Recording Start Printout
New chart speed printout
Message printout
Date format
SD memory card
(/EM1 option)
1-36
Description
Mar.31.2004!
15:50*
1 1.000V
2 -1.000V
0.000
1
RED
50mm/h_
• Type of measured values to be printed/disable periodic printout
Use Print1 in Basic Setting mode to set the type of measured values to be printed.
You can select Inst, Report (statistical calculation value), or Off.
• If Report is selected, use Print2 in Basic Setting mode to select the report data type. 7.8
• Printout interval
Use Print 1 in Basic Setting mode to set the periodic printout interval.
• Turn On/Off periodic printout for each channel
Use Aux > Print out in Setting mode to enable/disable the periodic printout on each
measurement channel.
• Scale printout and recording color printout (pen model)
Use Print > Scale in Basic Setting mode to turn scale printout On/Off.
Use Print > Pen color in Basic Setting mode to turn pen color printout On/Off (pen
model).
• Select channel printout or tag printout
Use Print > CH/Tag in Basic Setting mode to select whether to use channel numbers
or tags in printouts.
• Set the tag
Use Aux > Tag in Setting mode to set the tag name.
In data display setup mode, select Screen No. > (the screen number) > Tag_1CH
digital display, Tag_2CH digital display, Tag_1CH digital + 1CH bargraph, or Tag_1CH
digital + 4CH bargraph.
• Turn printout On/Off
Use Print > Alarm in Basic Setting mode to select whether to print the alarm
occurrence and release, print only the alarm occurrence, or not print.
• Time printout format
Use Personalize > Time print > Alarm in Basic Setting mode to set the time printout
format when printing alarm occurrence/release.
• Turn printout On/Off
Use Print > Record On in Basic Setting mode to enable/disable the recording start
printout.
• Time printout format
Use Personalize > Time print > RCD On in Basic Setting mode to set the time
printout format.
• Turn printout On/Off
Use Print > Chart speed in Basic Setting mode to set whether to print the new chart
speed when the chart speed is changed.
• Time printout format
Use Personalize > Time print > C. Speed in Basic Setting mode to set the time
printout format.
• Set the message string
Use Aux > Message to set the message string to be printed.
• Time printout format
Use Personalize > Time print > Message in Basic Setting mode to set the time
printout format.
• Execute the message printout
Use Func > Message in Operation mode to execute the message printout.
Use Date format > Type in Basic Setting mode to set the printout/display format of the
date.
Use Data save in Setting mode to set how to start and stop data saving.
Use Aux > Data replay to configure the recorder settings for replaying saved data on a
chart paper using a dot model.
Channel number
or tag
Measured value
2.000
Scale
V
Recording color
Reference
Section
7.8
7.8
6.6
7.7
7.7
6.7
8.2
7.7
7.16
7.7
7.16
7.7
7.16
6.8
7.16
3.10
7.19
IM04P
01B01-
03E
IM 04P01B01-01E