Resetting The Report Data Of The Periodic Printout - YOKOGAWA MuR10000 Manual

3.11 Resetting the Report Data of the Periodic
Printout
Procedure
IM 04P01B01-01E
This operation resets the past report data when the recorder is configured to print the
report data (the average, the minimum, the maximum, or the sum) of the measured
values in periodic printout.
Resetting the Report Data
1. Press the key.
FUNC
2. key to select Periodic and then press the
Press the
Func=Periodic
3. key to select Reset and then press the
Press the
The report data is reset, and the calculation of the report data starts again from
that point. The screen returns to the data display screen.
Log data=Reset
* When the key or key is pressed while holding down the SHIFT key, the operation is reversed as
when the respective key is pressed by itself.
key.
key.
3-17
1
2
3
4
5
6
7
8
9
10
11
12
App
Index