Setting The Periodic Printout Interval And The Type Of Data To Be Printed - YOKOGAWA MuR10000 Manual

7.8 Setting the Periodic Printout Interval and the
Type of Data to Be Printed
Procedure
Periodic Printout Interval and Type of Data to Be Printed
7-12
This section explains the details of setting the periodic printout interval and the type of
data to be printed.
Basic Setting mode cannot be entered when recording is in progress or when
computation is in progress on models with the computation function (/M1 option).
Changing the Settings
1.
Hold down the
MENU
2.
Hold down the
Setting mode.
3.
Press the key or SHIFT +
key.
4.
Set each item and press the
key or SHIFT +
Use the
For the procedure on how to enter values or characters, see section 4.2.
If you press the ESC key in the middle of the operation, the settings entered up to
then are cancelled, and the display returns to a higher level menu.
5. When the Setting complete screen appears, do either of the following:
To correct the setting, press the
If you are done, press the ESC key.
Basic=Print1
Periodic=Auto
Ref.Time=00:00
(When Period is set to Manual)
Interval=1h
Mode=Inst
Printout1
ESC/? Setting complete
Applying the Changes and Returning to Operation Mode
key or SHIFT +
Press the
the key to select Store and then press the
the screen returns to Operation mode. If you select Abort and press the
changes are discarded, and the screen returns to Operation mode. Press the ESC key to
return to the Basic= screen.
key for 3 seconds to enter Setting mode.
and keys simultaneously for 3 seconds to enter Basic
key to select Print1 and then press the
key.
key to select values.
key.
Select the periodic printout interval mode.
Set the reference time.
Select the periodic printout interval.
Set the type of data to be printed to
instantaneous value or report.
Select Off to disable periodic printout.
The new setting takes effect.
key to select End and then press the
key. The changes are applied, and
key. Press
key, the
IM 04P01B01-01E