YOKOGAWA MuR10000 Manual page 195

Four Arithmetic Operation
Power and Other Computations
IM 04P01B01-01E
• Status of the Remote Control Input Terminal (D01 to D05, /R1 option)
The status of the remote control input signal (1 or 0) can be used in the computation.
Use D01 to D05 (the number following the letter D is the remote control input terminal
number) to specify the status in the equations.
The data that can be used in equations are measured values, computed values,
constants, communication input data, and remote control input terminal status.
Equation Examples
• Addition 01+02
(Determines the sum of the measured values of channel 1 and channel
2.)
• Subtraction 01–02
( Determines the difference of the measured values of channel 1 and
channel 2.)
• Multiplication 01*K03
(Multiplies constant K03 to the measured value of channel 1.)
• Division 01/K02
(Divides the measured value of channel 1 by constant K02.)
Note
By setting an equation similar to the one shown below, you can determine the accumulation
of a specified channel (in this case channel 01) and make the result the computed value of
computation channel 0A.
Computing equation of computation channel 0A: 0A+01
The data that can be used in equations are measured values, computed values,
constants, communication input data, and remote control input terminal status. You can
nest a computing element inside the parentheses of another computing element.
Equation Examples
• Power 01**02
(Determines the measured value of channel 1 to the power of
the measured value of channel 2.)
• Square root SQR(02)
(Determines the square root of the measured value of channel
2.)
• Absolute value ABS(02)
(Determines the absolute value of the measured value of
channel 2.)
• Common logarithm LOG(01)
(Determines the common logarithm (log
value of channel 1.)
• Exponent EXP(01)
(Determines e to the power of the measured value of channel 1.)
Note
You can determine the natural logarithm by setting an equation like the following.
From log X = log X/log , we obtain log
b a a
Hence, to determine the natural logarithm of channel 1, we set
Constant
Computing equation
9.2 Setting the Computing Equation
X = log X/log e
e 10 10
K01 = 0.43429(log e), and
10
LOG(01)/K01.
) of the measured
10
Index
9-5
1
2
3
4
5
6
7
8
9
10
11
12
App