Turning Trend Recording (Dot Model) And Periodic Printout (Including The Printout Using The Tlog Timer) On/Off For Each Channel - YOKOGAWA MuR10000 Manual

9.9 Turning Trend Recording (Dot Model) and
Periodic Printout (Including the Printout Using
the TLOG Timer) ON/OFF for Each Channel
Procedure
Explanation
IM 04P01B01-01E
This section explains the details of setting the trend recording and periodic printout for
each computation channel.
The following settings can be entered for each channel.
• Turn trend recording ON/OFF (dot model only).
• Turn the printing of computed values ON/OFF during periodic printout.
1.
Hold down the key for 3 seconds to enter Setting mode.
MENU
2.
Press the key or SHIFT +
3. Press the key or SHIFT +
4. key or SHIFT +
Press the
5.
Set each item and press the
Use the key or SHIFT +
For the procedure on how to enter values or characters, see section 4.2.
If you press the ESC key in the middle of the operation, the settings entered up to
then are cancelled, and the display returns to a higher level menu.
6.
When the Setting complete screen appears, do either of the following:
Press the key to set other channels.
If you are done, press the ESC key.
7.
Hold down the key for 3 seconds to return to Operation mode.
MENU
Set=Math
Math=Aux
Aux=Print out
CH=0A-0A
First channel Last channel
(Dot model)
Trend=On
Periodic=On
0A-0A Channel
Setting complete
ESC/?
Periodic Printout
On: Prints the computed values (instantaneous values or report data) of the specified
channel during periodic printout.
Off: Does not print the channels and computed values during periodic printout.
key to select Math and then press the
key to select Aux and then press the
key to select Print out and then press the
key.
key to select values.
Set the channel range.
Turn trend recording On/Off.
Select whether to print the computed
values during periodic printout and
printout using the TLOG timer (On/Off).
The new setting takes effect.
1
2
3
4
key.
key.
5
key.
6
7
8
9
10
11
12
App
Index
9-17